
Rust, oil and leaf marks treated one by one
Paver Stain Removal in Lake Nona, FL
Call (689) 302-4968 for a free estimate to lift rust, oil and leaf stains from Lake Nona pavers.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who removes stains from pavers in Lake Nona, and how soon is the answer?
A local contractor treats stained pavers in Lake Nona, FL, and a reply lands within 1 business day, usually much sooner. The estimate is free, and you choose the day. To get started, call (689) 302-4968.
A stain is not one problem. Rust from sprinklers, oil from a car, leaf tannin and green growth each need their own treatment, and the wrong one can set the mark. The contractor names each stain, tests a small patch and treats them in turn. A driveway with orange streaks can look even again. Point out the worst marks when you send a free estimate request.
Which stains show up on Lake Nona pavers?
Five kinds turn up most often around southeast Orlando, and each has a different cause. The list below names them so you can tell your contractor what you see. To describe yours, call (689) 302-4968.
Rust
Orange or red streaks near sprinkler heads, patio furniture and planters.
Oil and grease
Dark circles where a car sits, and drips from a grill or a bike chain.
Leaf tannin
Brown blotches under a tree, darker after a wet week.
Green and black growth
Algae, mold and moss, which an Orlando company ties to shade and humidity.
White haze
Efflorescence on newer pavers, which comes from salts in the material and is not dirt.
Dark streaks and slick spots
A mix of grime and growth along walks, where footing gets slippery.
Which Orlando area towns can ask for stain removal?
Homes in Lake Nona and in each town below can request a free estimate. Pick a town to see what stands out there. If yours is missing, (689) 302-4968 is the number to try.

Why do sprinklers leave orange marks on pavers?
Iron in the water
UF/IFAS Florida-Friendly Landscaping says most Florida well water carries a lot of iron, and that irrigating with it leaves orange streaks on buildings and other surfaces. Pavers near a spray head collect the same deposits. To ask about a streak you cannot identify, send a free estimate request.
Check the source before the stain
A paver maker says to find the source of a rust stain first, whether it is sprinklers, patio furniture or fertilizer. Treating the paver while the spray keeps hitting it only sets up the next round. Tell the contractor where your sprinkler heads sit when you call (689) 302-4968.
What a water test tells you
UF/IFAS suggests testing the water and says the county Extension office can guide you. Softeners, oxidizing filters and chlorination with filtration are the treatments it lists. The pavers get cleaned, and the water gets handled separately by someone who works on irrigation. For the paver side, send a free estimate request.
How is an oil stain on pavers treated?
Fresh spills first
A paver maker says to blot the excess and then apply an oil and grease remover, left on for 6 to 8 hours until it dries to a powder that gets swept away. A newer spill is easier than one that has baked in all summer. To flag a fresh drip, call (689) 302-4968.
Deep oil may not fully lift
A paver cleaning company says oil that has soaked in cannot be washed out the way surface dirt can. Some old marks lighten without vanishing, and a good contractor says so before the work starts. To ask what yours may do, send a free estimate request.
Never seal over it
Unilock says a coat traps whatever sits on the surface, so an oil spot sealed over stays visible and can look darker. The spot gets treated and dried first. If a coat is planned, mention it when you call (689) 302-4968.
What is the paver stain removal process?
The stain removal process is a short list of careful steps, and the test patch is the one people skip. It protects the rest of the driveway. To ask a contractor how they run it, call (689) 302-4968.
1. Name each stain
Rust, oil, tannin and growth get told apart first, because each needs its own treatment.
2. Test a hidden paver
A paver maker advises trying one or two out-of-sight pavers before treating a large area.
3. Treat each stain with its own product
A rust treatment goes on rust, an oil remover goes on oil and a growth cleaner goes on algae and mold.
4. Rinse at moderate pressure
Too much force pushes sand out of the joints. Rinse water goes to planted ground where the site allows, not into a storm drain.
5. Repeat where needed
A paver maker says a rust treatment can need more than one pass, so a second visit to the same spot is normal.
6. Re-sand and, if wanted, seal
Joints get fresh sand once everything is dry. A coat goes on only after the surface is spotless.
What does paver stain removal cost in Lake Nona?
No Orlando page read for this guide lists rust or oil removal as its own line, so the table builds from the pieces that exist. An Orlando pressure washing site puts basic cleaning or minor stain removal at $150 to $400, and larger patios or walkways at $400 to $1,000. Heavier stains cost more because the time grows. To price your own marks, send a free estimate request.
If a coat is planned, ask for one price. Central Florida paver companies publish $1.50 to $3.00 per square foot to clean, sand and seal, with a $1,000 project minimum. Already holding a quote? Call (689) 302-4968 to compare it.
| Job | Published price | Who published it |
|---|---|---|
| Basic cleaning or minor stain removal | $150 to $400 | One Orlando pressure washing site |
| Larger patios or walkways | $400 to $1,000 | One Orlando pressure washing site |
| Clean, sand and seal, 400 sq ft patio | $600 to $1,200 | Math from this site's $1.50 to $3.00 range |
| Project minimum for a full seal job | $1,000 | One Central Florida paver company |
| Stripping a failed coat, added on top | $500 to $1,000 or more | One Central Florida paver company |
Prices as the companies published them for the Orlando area, read in November 2026. Old or deep stains take longer, and your own quote may land elsewhere.

Will the stain come back?
When the cause is still there
Rust comes back if the sprinklers keep spraying iron-rich water, and oil comes back if the car keeps dripping. Leaves stain again each year, according to a paver maker, which leaves the owner to decide about the tree. Fixing the cause matters as much as the cleaning. To talk about yours, call (689) 302-4968.
When a coat is in place
A sealed paver resists water, dirt and oil better, according to Unilock, so later spills clean up more easily. That does not make the surface stain-proof. Plan on a wipe-up the same day. To ask whether sealing suits your pavers, send a free estimate request.
When a treatment risks the coat
A paver maker warns that rust remover can damage sealer. On a sealed driveway, the contractor weighs a spot treatment against recoating the area afterward. Mention any past coat when you call (689) 302-4968.
Can every stain come out of pavers?
No, and an honest contractor says so up front. A paver cleaning company lists efflorescence, embedded rust, soaked-in oil and leaf tannin as marks a plain wash will not fix. A paver maker adds that it cannot promise any home method will work. Ask what the contractor expects from each of your stains when you send a free estimate request.
Time matters as well. A Florida stone company says most stains can be removed, but success depends on the type and on how long the mark has been there. Treating a spill in the first weeks beats treating it after a summer. To report a new spill, call (689) 302-4968.
Is stain treatment safe for plants, pools and runoff?
It should be, and the contractor should tell you how. An Orlando company moves plants and pets away from stripping work and treats weeds first. A paver cleaning company sends rinse water to planted ground where it can, since the EPA's stormwater program regulates what reaches storm drains. Ask how plants and the pool are covered when you send a free estimate request.
Lake Nona has many homes with pools and screen enclosures, so the contractor should also say where the rinse water goes. A short plan on paper helps. To ask for one, call (689) 302-4968.
Where do Lake Nona stains come from?
Rain, shade and growth
Wikipedia's Orlando notes describe a rainy season from May to late October, with afternoon thunderstorms almost every day in the hot months. An Orlando company says shade and humidity feed algae, mold and moss. Together they turn walks green and slick. To book a look, send a free estimate request.
Irrigation along the new streets
ZIP 32827 grew from 6,362 people in 2010 to 19,042 in 2020, and Wikipedia says Lake Nona passed 50,000 people by 2015. New lawns come with new sprinklers, and any spray head that reaches a driveway can leave an orange mark. If yours do, call (689) 302-4968.
Rental homes and move-out cleanups
About 39 percent of occupied homes in ZIP 32827 are renter occupied, according to ZIP code data. Landlords and property managers often need oil spots and rust streaks gone before the next tenant arrives. To plan a visit between tenants, send a free estimate request.
Looking for a bigger fix?
If stains come with a failed coat, read about paver restoration. If you only need a wash and new sand, see paver cleaning. Stone decks are covered on travertine sealing, and you can always go back to paver sealing in Lake Nona.
What do pavers look like after stain treatment near Lake Nona?








Why have a local contractor treat stains in Lake Nona?
A product that lifts rust can ruin a coat, and a product that lifts oil can spread it. A contractor who works around southeast Orlando has dealt with the iron, the leaves and the shade. To start, call (689) 302-4968.
Look at the whole job in writing
A written scope names the stone, the finish, the products, the test patch and what a wash cannot fix. Ask for it before the date is set.
A contractor who plans around the sky
Summer storms arrive almost daily, so a careful contractor watches the forecast and moves the day instead of sealing into rain.
Your call at every step
The estimate is free and the schedule is yours. Passing on a quote costs nothing.
Paver stain removal questions from Lake Nona homeowners
What is the average cost to seal pavers in Florida?
Central Florida paver companies publish $1.50 to $3.00 per square foot to clean, sand and seal, with a $1,000 project minimum. Stains should be treated before that step, because Unilock says a coat traps whatever sits on the surface.
Can I clean, sand and seal my pavers?
That is the order the job follows: clean, sand the joints, then seal. A contractor treats rust, oil and leaf marks during the cleaning step, since sealer locks them in. Ask for each step to be listed in the quote.
How can I get my pavers clean?
With the right product for each kind of mark and moderate pressure. A paver cleaning company says pavers take lower pressure than concrete slabs because the joint sand washes out. A contractor matches the treatment to the stain and tests a small patch first.
What is the most effective way to clean patio pavers?
A rotary surface cleaner with a treatment matched to the stain does more than raw force. A Florida cleaning company says some marks, such as embedded rust, soaked-in oil and tannin, will not come out with a plain wash.
How much does it cost to clean pavers?
An Orlando pressure washing site puts basic cleaning or minor stain removal at $150 to $400, with larger patios or walkways at $400 to $1,000. Heavy stains cost more. Compare what each quote lists.
Why do my pavers have orange marks after the sprinklers run?
Iron, most often. UF/IFAS says most Florida well water has a lot of iron and that it leaves orange streaks on whatever it sprays. The county Extension office can point you to water testing.
Will a rust stain come back after treatment?
It can if the sprinklers keep spraying iron-rich water. A paver maker says to find the source first, and that a rust treatment may need more than one pass. Fixing the water fixes the repeat.
Can oil stains be removed from pavers?
Often, and fresh spills respond sooner. A paver maker leaves an oil treatment on for 6 to 8 hours until it dries to a powder. A cleaning company says oil that has soaked deep may not wash out, so ask what to expect.
Should pavers be sealed after stain removal?
Usually yes, once they are spotless and dry. Unilock says sealer helps resist water, dirt, oil and stains, and that it traps anything left on the surface. A paver maker also warns that rust remover can damage an existing coat.
Can leaf stains be removed from pavers?
Yes, with a treatment made for them, but they can return. A paver maker says leaves stain again each year, so the choice may come down to living with it or trimming the tree. A cleaning company lists tannin among marks a plain wash will not lift.
Tell a contractor about the stain, get a straight answer
Phone or use the short form, and a local contractor replies within 1 business day, usually much sooner.
Free, no obligation
