
Paver sealing for Union Park homes
Paver Sealing in Union Park, FL
Between the Econlockhatchee River and Rouse Road, Union Park pavers get a free sealing estimate when you call (689) 302-4968.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Union Park
Paver sealing in Union Park starts with a free estimate from a local contractor who washes, re-sands and seals driveways, walkways and patios. Someone will answer within 1 business day, usually much sooner than that. Call (689) 302-4968, and say if your home sits near the river or out toward Rouse Road.
Maybe your driveway has gone gray and splotchy since the last coat wore off, and green film has settled along the shaded edge. A wash, fresh sand and a new coat give it one even tone again. You can send a free estimate request to describe what you see, and a price comes before any work is booked.

Why hire a local paver sealing contractor in Union Park?
Union Park homeowners pick a local paver contractor because a river, a creek greenway and Orlando storms all affect when pavers dry. To see how that applies on your street, send a free estimate request.
See the price before you commit
The contractor measures your Union Park pavers for free. You hear the number before agreeing to any work.
A yardstick for quotes
Central Florida companies post $1.50 to $3.00 per square foot to clean, sand and seal. Hold bids to that yardstick.
Your finish, your call
Matte looks calm next to brick or stucco. Wet look adds depth, but a daily driveway will show scuffs sooner.
Dry days set the date
Near the river, drying time drives the schedule. You choose what works, and the estimate binds you to nothing.
Get Your Free Estimate in Union Park
Tell us about your pavers in Union Park.
Free, no obligation

What paver problems show up most in Union Park?
River air that keeps pavers damp
Union Park is bordered on the west and north by the Econlockhatchee River, a blackwater river with a forested floodplain along its whole length. Damp air near forest and water helps green film grow on pavers that stay shaded. Orlando also gets about 51 inches of rain a year, mostly June through September. A shaded walk close to the river may take days to dry, and sealer needs a dry surface. Ask the contractor to check the shaded side of the lot at the first visit, since that is where the wait is longest.
Sand lost near the greenway edge
Many Union Park lots sit near Blanchard Park and the Little Econ Greenway, where water moves through a chain of flood-control dams. Heavy rain sends water across driveways and walks. It can pull joint sand out and leave joints open. After a wash, a contractor refills the joints so pavers stay locked together and weeds have less room. Full joints also keep edges tight beside the walk, where feet and mowers wear them down.
Orange streaks from irrigation water
The University of Florida reports high iron in most Florida well water, and it shows as orange streaks where irrigation lands. If your sprinklers reach the drive or the front walk, check for rust-colored fans. These need a stain treatment before sealing, because sealer would trap them for good. Turning a spray head away from the pavers helps slow new marks. If your yard runs from a well, tell the contractor early so the stain plan fits.
Layers of old sealer and uneven color
Pavers that have been sealed more than once can show patchy color, cloudy spots or peeling. A solvent-based coat blocks any water-based sealer from going on top. A contractor tests a small spot to learn what is down, then picks the product that fits. A coat applied over the wrong base can cloud within weeks. Old receipts or a note from the seller can speed the answer, and a quick test patch settles the rest.
Cloudy spots that trace back to coating day
Cloudy spots on a Union Park walk often trace back to the day the coat went on. Solvent-based products can go white and peel in humid weather, one Central Florida company says, so it advises skipping days with rain in the forecast. A thick coat laid in a single pass can do the same. A contractor can tell which cause you have.
Which parts of Union Park have the most pavers to seal?
Union Park is a small place of 10,452 people with clear lines: North Dean Road and the Econlockhatchee River on the west, J Blanchard Trail on the north, Rouse Road on the east and Bloomfield Drive on the south. Homes near the river tend to have more shade and damp, while homes toward Rouse Road have more open sun. Tell the contractor where you live when you send a free estimate request, because it shapes the cleaning plan.
Blanchard Park runs 87 acres across the north side, and the Little Econ Greenway passes through it on a 14-foot asphalt path. Homes close to the park may see more leaf fall, more water in heavy storms and more shade over side walks. If your pavers sit near the trail, call (689) 302-4968 and mention which side of the lot gets the least sun.
Five schools sit inside Union Park, and a driveway that holds family cars sees steady wear. If your subdivision has an HOA, a guide to Orlando HOAs says driveways and walkways are commonly reviewed, with committees often taking 30 to 60 days. Ask first, then send a free estimate request.
What does paver sealing cost in Union Park?
Companies across Central Florida post $1.50 to $3.00 per square foot to clean, sand and seal. In Union Park the things that nudge a quote within that range are green film near the river, rust marks and old sealer. A driveway plus a back patio and a front walk adds area quickly. For a number that fits your own pavers, send a free estimate request.
Access can change the price as well. A wide drive off a quiet street is simple, while a patio past a narrow gate takes more carrying. A lot that stays damp may need a second visit. Call (689) 302-4968 and describe your layout so the contractor can flag the likely unknowns.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $450 to $900 |
| 600 sq ft | Two car driveway | $900 to $1,800 |
| 1,000 sq ft | Large driveway or pool deck | $1,500 to $3,000 |
| 1,500 sq ft | Driveway plus pool deck | $2,250 to $4,500 |
Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

How does a paver sealing job work in Union Park?
Look over the lot and the shade
The contractor walks your Union Park driveway, walk and patio, noting where trees shade the pavers and where water stands after rain. Low pavers get reset first, since sealer keeps a dip as it finds it. If an old coat is down, a small test shows what it is. The contractor also notes edges that have lifted and roots that may be pushing pavers up. Water-based sealer cannot go over solvent-based sealer, so this test decides the product.
Wash away green film and rust
The wash clears algae, leaf stains and packed dirt. Rust marks from sprinklers and oil from the garage get a stain treatment. Sealing over dirt can trap a stain for good, so this step decides how the finish looks. Rinse water stays off flower beds and away from the street drain where possible. Furniture, planters and cars move out of the way before the wash begins.
Put fresh sand in every joint
Washing pulls out old joint sand, so new sand goes in before any sealer. Full joints keep pavers tight and slow weeds. Near a greenway where water crosses the lot, this step matters even more. The surface is swept clean when the joints are full, and loose grains are removed so they do not dull the finish.
Wait for a fully dry surface
Sealer needs a dry surface. A shaded patio near the river can stay damp long after the sun hits the drive, so the contractor may seal in two stages. Summer storms arrive most afternoons, which is why mornings are the usual start. Sealing damp pavers risks a white haze. If a shower rolls in mid-job, the crew stops and returns on the next dry morning.
Apply the finish and keep off
Sealer then goes on in whichever finish you picked. Two to five years between coats is common, and a wet look shows scuffs sooner than matte. One Central Florida company puts the wait at 4 to 6 hours for feet and 48 hours for vehicles. Ask what that means for your week. A cloudy, humid day can stretch each of those times, and the contractor should say so before the job starts.
Complete paver services in Union Park
In Union Park the job moves in a clear sequence: look, wash, re-sand, dry, seal. Green film, rust and old dirt come off, and fresh sand fills the joints right before the coat. The sealer is last, so nothing grimy is trapped. To learn how long each stage runs for a drive your size, call (689) 302-4968.
Driveways take tires and sun, front walks take footsteps and sprinkler spray, and back patios hold leaves and damp. Pavers near the river side of the neighborhood may have the most green. When you send a free estimate request, list every surface you want done so the plan covers each one.
Sealer choices start with water-based versus solvent-based, then matte versus wet look. A solvent coat from an earlier owner shuts the door on a water-based product. Matte stays quiet and hides scuffs. Call (689) 302-4968 to work out which finish suits your brick, stucco or tile.
Orlando rain peaks from June through September, with strong storms most afternoons. A job near the river may need an extra dry day. The cooler, drier months often give an easier window. To fit a date to your street and your schedule, send a free estimate request.
Questions to ask before you hire
- How soon after the job can I pressure wash or hose off the pavers?
- How do you plan the job around summer afternoon thunderstorms?
- Can you send your certificate of insurance before the day of the job?
- What happens to joints where the sand has washed out or a few pavers have settled?
- Which sealer goes on my pavers, and does it leave a wet look or a natural one?
- Will the sealer make my pool deck slippery when it is wet?
- Do you wait until the pavers are fully dry before the sealer goes on?
What do sealed pavers look like around Union Park?









Why local matters in Union Park
A contractor who knows Union Park knows how close the river and the greenway sit to many yards. Shade, leaf fall and damp are normal there, not surprises. A local crew plans extra wash time and a longer dry window. To talk with a contractor who works near the river and the trail, call (689) 302-4968.
Local crews also know the roads that cross the area, from Dean Road to Rouse Road. A contractor used to them plans a morning arrival and a clear spot for the truck. If that sounds useful, send a free estimate request and ask how the visit would run.
Water control is part of life here, with five flood-control dams on the Little Econ and Michaels Dam dating to 1965. A contractor used to that setting expects wet ground after heavy rain. That experience helps decide how long to wait before sealing. Describe your yard when you send a free estimate request, with no strings attached.
What is the story behind Union Park and the Little Econ?
The land follows the Econlockhatchee River, a 54.5-mile blackwater river that joins the St. Johns. Its name may come from a Muscogee phrase meaning earth-mound stream, and its floodplain stays forested the whole way. The Little Econlockhatchee River is an 18-mile branch of it, so call (689) 302-4968 if you live near the water.
Blanchard Park honors Jay Blanchard, the first director of Orange County parks, and Michaels Dam there was built in 1965 for flood control. Anglers fish at the dam, and the Little Econ Greenway runs 7.4 miles from Alafaya Trail to Forsyth Road. Near any of these places, send a free estimate request and share your street.
Frequently Asked Questions
How long does paver sealing last in Union Park?
For Union Park pavers, companies commonly quote a span of two to five years between coats. Shaded pavers near the river may sit at the shorter end. An Orlando company says water that beads means the sealer still works, and water that soaks in means it is time.
What is the average price for paver sealing in Union Park?
Companies across Central Florida post $1.50 to $3.00 per square foot to clean, sand and seal. A Union Park quote depends on green film, rust marks and old sealer. Ask for the total area in writing so you can compare bids, and ask whether joint sand and stain work are in the number.
Is it a good idea to pressure wash pavers in Union Park before sealing?
A wash is part of every sealing job, because sealing over dirt can trap stains and green film. The contractor picks the method for your pavers. Washing pulls out joint sand, so fresh sand goes in before any sealer.
What happens if pavers are not sealed in Union Park?
Joint sand tends to wash out sooner, and stains and green film settle in more easily. Heavy rain near the river can speed that up, and bare pavers may need a wash more often than sealed ones. A bare driveway often needs a wash more often than a sealed one.
Should you seal pavers right after power washing in Union Park?
Not right away, since sealer needs a dry surface. After the wash, the pavers must dry and the joints must be refilled with sand. In damp, shaded spots near the river that can take a full dry day or more.
Does living near the Little Econ change how pavers are sealed in Union Park?
It can change the timing and the wash. Lots near the river and greenway tend to be damp and shaded, so green film is common and the drying window is longer. The steps stay the same: wash, sand, dry and seal. Ask the contractor how much extra drying time your lot is likely to need.
How soon can I walk or park on sealed pavers in Union Park?
One Central Florida company puts the wait at 4 to 6 hours for feet and 48 hours for vehicles. Humid or shaded spots can take longer. Ask the contractor for the time that fits your sealer.
Do I need HOA approval to seal pavers in Union Park?
It depends on your subdivision. One Orlando renovation guide lists driveways and walkways as commonly reviewed, and committees can take 30 to 60 days to decide. Ask your board first and keep any approval in writing.
Can tree roots near the Little Econ lift my Union Park pavers?
They can lift pavers anywhere trees grow close to a drive or walk. Sealer does not fix a lifted paver, and it would keep the bump as it is. The contractor resets raised pavers first and then seals the whole surface.
Do I need to wash and sand my Union Park pavers before sealing?
Yes, a wash opens the job, and fresh sand fills the joints before the coat. Sealing over dirt can trap stains for good. Plan on the wash, the sand and the coat as one job.
How do I know my Union Park pavers need a new coat?
Try a water test on a dry day. Water that beads means the sealer still works, and water that soaks in and darkens the paver means it is worn. Faded color, open joints and green film along the shaded edge are other signs.
Should I pick matte or wet look for my Union Park pavers?
Matte is quiet and hides scuffs, which suits a daily driveway. A wet look adds depth to the color but shows scuffs sooner. Ask the contractor to show a small patch of each in your own sun, since color looks different in shade than in full light.
Nearby areas we serve
Ready for a Free Estimate in Union Park?
Call (689) 302-4968 and tell us about your pavers.
Free, no obligation
