
A fresh start for tired, cloudy pavers
Paver Restoration and Resealing in Lake Nona, FL
Get a free estimate at (689) 302-4968 to strip, repair and reseal worn pavers in Lake Nona.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who restores worn pavers in Lake Nona, and when will they reply?
A local contractor restores and reseals pavers in Lake Nona, FL, and an answer reaches you within 1 business day, often sooner. The estimate is free, and the schedule is yours. To begin, call (689) 302-4968.
Restoration is for pavers that need more than a rinse: a coat gone milky, sand washed out, color gone flat or a corner that has sunk. The contractor repairs first, strips what has failed, cleans, refills the joints and seals. A driveway that looks old can match the rest of the yard again. Tell the contractor what bothers you most when you send a free estimate request.
What are the signs a coat of sealer has failed?
A milky or hazy look
An Orlando sealing company says water vapor trapped under a coat leaves a milky haze, and the haze does not go away on its own. It shows first on shaded stretches that stay damp. If yours looks like fogged glass, call (689) 302-4968.
Sticky, yellow or dirty after rain
The same company lists pavers that feel sticky in direct sun, turn yellowish within months or look dirty after heavy rain. Those are the marks of a coat that was thin, cheap or put on over something it did not like. Photograph the worst patch, then send a free estimate request.
A coat that clouded on the day
Perfect Paver names five causes of cloudy sealer: over-application, an incompatible product underneath, poor prep, the wrong moisture or weather and the wrong sealer for the surface. Unilock adds that sealing damp pavers also leaves a whitish film. Knowing the cause tells the contractor how to fix it, so mention what you remember when you call (689) 302-4968.
Which Orlando area towns can ask for paver restoration?
Pavers in Lake Nona and in each town below can be looked at for free. Each name opens a page of notes for that area. Not seeing your street? Call (689) 302-4968 and ask.

What is the difference between restoring and resealing pavers?
A reseal keeps a good coat going
A reseal fits pavers whose coat has worn thin but still holds. The surface gets cleaned, the joints get fresh sand and a new coat goes on. It is the lighter, cheaper job. To see whether yours qualifies, send a free estimate request.
A restoration repairs what is underneath
A Central Florida company describes full restoration as stripping old sealer, deep cleaning, re-leveling and a fresh coat. Perfect Paver puts the order as structural fixes first, then stable joints, failed sealer removal, color restoration and a new coat. That order keeps new sealer from locking in old problems. Call (689) 302-4968 to talk through yours.
Color work is optional
An Orlando company lists optional color staining for patterns, which can even out faded or blotchy pavers. Many Lake Nona neighborhoods have an owners' association, and a new color can count as an exterior change, so check the rules first. To ask about options, send a free estimate request.
What is the paver restoration process, step by step?
The restoration process runs in eight steps, and the repair step comes before any product touches the surface. A contractor can walk you through each one for your driveway or patio. To book that visit, call (689) 302-4968.
1. Look it over and test
The contractor notes the old coat, sunken spots, loose edges and weeds, and tries products on a small area.
2. Repair the base first
Sunken pavers and failing edges are reset before sealing, because sealer cannot fix drainage or a bad base.
3. Treat the weeds
Weeds in the joints are treated before the stripping work starts.
4. Strip what has failed
An Orlando company rolls on a paste about 100 square feet at a time, and clearing every layer can take several passes.
5. Rinse and clean
A washer takes off the stripper and the loosened coat, and a cleaner handles algae. Moderate pressure leaves the sand where it belongs.
6. Refill the joints
Fresh joint sand goes in once the pavers are dry, then gets settled and topped off.
7. Let everything dry
Sun-baked pavers dry in hours and shaded ones need about 24 hours. Unilock asks for 24 to 48 hours of clear weather around the job.
8. Seal in one pass
A sprayer lays the coat and a dry roller evens it. Doing the whole area in one session avoids gloss lines.
What does paver restoration cost in Lake Nona?
No Orlando page read for this guide prices a full restoration as one per square foot rate, so the table builds from published pieces. A clean, sand and seal job runs inside this site's $1.50 to $3.00 range, and stripping a failed coat adds $500 to $1,000 or more. An Orlando pressure washing site puts sealing or restoration at $600 to $2,000 and sometimes more. To price your own pavers, send a free estimate request.
Big repairs change the math. The same Orlando site lists extensive repairs or full replacement at $2,000 to $5,000 or more, which is why a quick look at the base comes first. Holding a quote already? Call (689) 302-4968 and compare each line.
| Job | Published price | Who published it |
|---|---|---|
| Clean, sand and seal, 600 sq ft driveway | $900 to $1,800 | Math from this site's $1.50 to $3.00 range |
| Stripping a failed coat, added on top | $500 to $1,000 or more | One Central Florida paver company |
| Sealing or restoration, one job | $600 to $2,000, sometimes more | One Orlando pressure washing site |
| Extensive repairs or replacement | $2,000 to $5,000 or more | One Orlando pressure washing site |
| Project minimum | $1,000 | One Central Florida paver company |
Prices as the companies published them for the Orlando area, read in November 2026. Your own quote may land elsewhere, and the base repair is often the line that moves it.

How long does a restoration take, and when can the pavers be used?
One day for a clean and seal, longer with stripping
A Central Florida company says most clean and seal projects finish in 1 day. Stripping stretches the schedule, because an Orlando company says clearing every layer can take several passes. Ask for the whole timeline when you send a free estimate request.
Feet, furniture and cars
The same Central Florida company asks for at least 4 to 6 hours before feet, about 24 hours before furniture and at least 48 hours before cars, longer where it is humid or shaded. Another Orlando company says vehicles wait about 72 hours, so ask which product is going down. To book a day that suits, call (689) 302-4968.
Rain after the work
A coat needs dry weather to cure. Wikipedia's Orlando notes describe strong afternoon storms almost every day in the hot months, so a careful contractor moves the date when the forecast turns. To choose a window, send a free estimate request.
Is it time to restore, or only to wait?
Pavers under two years old
Newer pavers rarely need restoring. White efflorescence has to clear first, and Unilock says that takes two to three months and up to a year. An Orlando company says 60 to 90 days. ZIP 32827 grew from 6,362 people in 2010 to 19,042 in 2020, so many Lake Nona pavers are in that window. Give the contractor the year the pavers went in when you call (689) 302-4968.
Pavers from the first building years
Wikipedia says Lake Nona held about 1,500 people in 2000 and over 50,000 by 2015, so plenty of driveways have had a decade or more of sun and storms. A first coat that went on years ago may now be failing. To have an older driveway looked at, send a free estimate request.
Pavers that were sealed with the wrong product
Unilock says sealing over an incompatible earlier product leaves a cloudy film. If a past owner or a bargain crew coated your pavers, a test patch tells the contractor what is down there. Describe what you know when you call (689) 302-4968.
Which season suits restoration around Lake Nona?
The dry months, November through April, give the longest rain-free windows, according to Wikipedia's Orlando climate notes. The rainy season runs May to late October, and the city averages 51.45 inches of rain a year, most of it from June through September. To choose a week that fits the forecast, send a free estimate request.
Heat matters too. Unilock aims for 50 to 90 degrees, about 75 ideal, and warns that hot pavers can stain or peel a coat early. Orlando's 90 degree days usually fall between April 9 and October 14, so summer jobs often start at dawn. Ask what time the coat goes on, or call (689) 302-4968.
Can restoration fix pavers that sank, rock or hold puddles?
Yes, but the fix is a repair and not a coat. Perfect Paver says sunken areas and failing edges are corrected before any sealing, and Unilock says sealer cannot cure poor drainage or a bad base. A paver that rocks under a tire is lifted, the bed under it is rebuilt and the stone is set back. To flag a low spot, send a free estimate request.
Large repairs are priced apart from sealing. An Orlando pressure washing site lists extensive repairs at $2,000 to $5,000 or more. Ask the contractor to separate the repair from the coat on paper, then call (689) 302-4968 with any questions.
Looking for a lighter job or a single surface?
If the coat is still sound, a wash and fresh sand may be enough, and the paver sealing and paver cleaning pages explain both. Stains have their own page too: paver stain removal. Or go back to paver sealing in Lake Nona.
What do restored pavers look like near Lake Nona?








Why have a local contractor restore Lake Nona pavers?
A restoration touches the base, the old coat, the sand and the new coat, and a mistake in one step shows in the next. A contractor who works around southeast Orlando knows the storms, the sprinkler water and the young pavers. To start, call (689) 302-4968.
Look at the whole job in writing
A written scope names the stone, the finish, the products, the test patch and what a wash cannot fix. Ask for it before the date is set.
A contractor who plans around the sky
Summer storms arrive almost daily, so a careful contractor watches the forecast and moves the day instead of sealing into rain.
Your call at every step
The estimate is free and the schedule is yours. Passing on a quote costs nothing.
Paver restoration questions from Lake Nona homeowners
Can I lay pavers directly on sand?
Not on sand alone. A Florida stone company describes 3 cm pavers set in sand over a compacted crushed limerock base, built up in 3 inch lifts over fabric. The thin sand bed levels the stone, and the base carries the load. A restoration visit often finds the base is the real problem.
How long does paver sealing last in Florida?
Two to five years, depending on the source. Orlando companies say 2 to 3 years, Perfect Paver says most Florida homeowners reseal every 2 to 3, and Unilock says 3 to 5. Sun, traffic and stone type all move the number.
How much is paver sealing in Florida?
Central Florida companies publish $1.50 to $3.00 per square foot to clean, sand and seal, with a $1,000 project minimum. Stripping a failed coat adds $500 to $1,000 or more, and extensive repairs cost more again.
What are common mistakes to avoid when laying pavers?
The costly ones sit under the surface: a thin or uneven base, poor drainage and weak edges. Unilock says sealing cannot fix drainage or a bad base, and Perfect Paver says structural issues get corrected before any sealing. Restoration starts there.
What is the difference between paver restoration and resealing?
A reseal cleans the pavers, tops up the sand and adds a coat. Restoration goes further: it strips a failed coat, repairs sunken or loose pavers, restores color and then seals. Choose by what the pavers show today.
Do pavers have to be stripped before they are resealed?
Not always. Stripping fits a coat that has turned milky, sticky or yellow. Unilock warns that sealing over an incompatible product or a damp surface clouds the new coat, so a contractor tests a small patch first.
Can milky sealer be fixed?
Often yes, but not by waiting. An Orlando company says the haze comes from trapped water vapor and does not go away on its own. The fix is usually stripping the coat, drying the pavers and sealing again with a breathable product.
How long should I wait before sealing newer Lake Nona pavers?
Two to three months, and up to a year, according to Unilock, because white efflorescence has to clear first. An Orlando sealing company says 60 to 90 days. Sealing over it locks it in.
How much does stripping add to the price?
One Central Florida paver company says stripping a failed coat typically adds $500 to $1,000 or more. An Orlando company says it may take several passes of stripper to clear every layer.
Want a straight answer on your worn pavers?
Send the short form or phone, and a local contractor writes back within 1 business day, usually much sooner.
Free, no obligation
