
Keep the warm color of your brick pavers
Brick Paver Sealing in Lake Nona, FL
Call (689) 302-4968 for a free estimate to seal brick pavers in Lake Nona.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Do contractors seal brick pavers in Lake Nona, and what is the reply time?
Yes, local contractors seal brick pavers in Lake Nona, FL, and a request is answered within 1 business day, often well before that. The estimate is free and carries no obligation. To ask about your brick, call (689) 302-4968.
Brick is a different material than concrete, and the difference shows in the sealer. Clay brick soaks up more water, dries slower in the shade and can show white salt blooms that a smooth paver might not. A coat chosen for brick keeps the warm color, helps shed water and leaves the surface easier to rinse. Describe the brick and where it sits when you send a free estimate request.
Why does brick need more care than a concrete paver?
It is more absorbent
Unilock says brick pavers are more absorbent than concrete, so the choice of sealer matters more. A thin or wrong coat lets water in anyway. Ask the contractor to name the product and say how it suits brick, or call (689) 302-4968.
It dries slowly in the shade
The same guide says drying runs slower in shaded areas. Brick under a porch roof or an oak canopy can hold moisture long after a storm, and sealing too soon seals the moisture in.
It shows efflorescence more
ProSoCo says efflorescence needs salt, water and a porous material and is most common on brick. The salts come from the ground and from brick, mortar, cement and sand. That is why the cleaning step before the sealer matters so much.

What is the brick paver sealing process?
The brick paver sealing process follows six steps, and the early ones carry the most weight on brick. To see how a contractor would order the work on yours, call (689) 302-4968.
1. Look at the brick
The contractor checks for white salt haze, old sealer, loose bricks and any spots where water collects.
2. Clean gently
A cleaner matched to the mark goes on and a surface cleaner rinses it. ProSoCo advises against muriatic acid on masonry because it can stain brick and etch joints.
3. Refill the joints
Sand is swept in and settled once the brick has dried.
4. Wait for dry
Unilock says shade can slow drying to about 24 hours, so a covered walk may need an extra day.
5. Seal with a brick product
A water-based coat goes on in thin, even passes with a sprayer and a dry roller, at a low sheen if you want the natural look.
6. Walk it with you
The contractor shows you the finish and says when feet can return.
What does brick paver sealing cost in Lake Nona?
No page read for this site publishes a price for brick alone, so this table builds from the pieces that do exist: the range for cleaning, sanding and sealing, the minimum charge and the extra for stripping. For the full job, Central Florida companies publish $1.50 to $3.00 per square foot. For a number on your brick, send a free estimate request.
Brick can run toward the higher end when it needs extra cleaning for salt haze or when old sealer has to come off. One company puts stripping at $500 to $1,000 or more added. Bids far below the range may skip the cleaning, so ask what each line covers. Call (689) 302-4968 if you want help comparing.
| Brick job | Published figure | Who published it |
|---|---|---|
| Clean, sand and seal, per square foot | $1.50 to $3.00 | Two Central Florida paver companies |
| A 300 sq ft brick walk and entry at that range | $450 to $900 | Math from the published range |
| A 500 sq ft brick courtyard at that range | $750 to $1,500 | Math from the published range |
| Minimum project charge | $1,000 | One Central Florida paver company |
| Stripping an old coat first | $500 to $1,000 or more added | One Central Florida paver company |
| Brick alone | No published rate found | Priced from the pieces above |
Prices as Central Florida companies published them for the Orlando area, read in November 2026. Small areas can price at the minimum, and your own quote can land elsewhere.
Which sealer should go on brick pavers?
Breathable beats sealed shut
A Central Florida company calls water-based sealer the professional standard because moisture can escape through the paver and white haze is avoided. It says solvent-based products can turn white and peel in Florida humidity. For salt-prone brick, that breathing matters. Ask for the product name, then call (689) 302-4968.
Matte keeps the natural look
Unilock suggests a matte or low gloss finish to keep brick looking natural. A wet look deepens the red, and one Orlando company says homeowners choose between high gloss and matte, so ask to see both on a sample.
Get the scope in writing
An Orlando company that writes about patio sealing says to ask for the scope, including the number of coats, in writing. That advice fits brick as well. When you send a free estimate request, ask for the coats and the product on paper.
How do white salt blooms on brick get handled before sealing?
Cleaning comes first, because ProSoCo says sealing does not remove salts already in the brick and holds them in. Its removal methods are a stiff brush for dry deposits, a water rinse and a chemical cleaner for stubborn ones, with no muriatic acid. It adds that efflorescence eventually stops once the salts have dissipated. A contractor decides which of these fits your brick. Ask by calling (689) 302-4968.

When can new brick pavers be sealed in Lake Nona?
The waiting period
One Orlando company says to wait 60 to 90 days on new pavers, and Unilock says efflorescence usually takes two to three months and may take a year. New brick in Lake Nona, where Wikipedia counts over 50,000 residents in 2015 against 1,500 in 2000, may well be inside that window. Tell the contractor the date it was laid, or send a free estimate request.
Water that keeps feeding the haze
ProSoCo says water can reach brick from rain, sprinklers, cracks, gaps and the ground. If white haze keeps coming back, the water source needs a look before any coat goes on.
How often should brick pavers be resealed?
Orlando sources land between two and five years. One company says about every three years, another says every two to three, and Unilock says three to five. Brick under open sun may come near two or three, while brick under a roof can run longer. To have yours checked, call (689) 302-4968.
Can brick pavers in the towns around Lake Nona be sealed too?
Yes. Lake Nona is a 17 square mile planned community inside Orlando, and homes in the towns below can ask for brick sealing as well. To check your street, send a free estimate request.
What do sealed brick pavers look like near Lake Nona?








What do homeowners ask about brick paver sealing?
How long does paver sealing last in Florida?
Orlando sources say two to five years. One company puts it at about every three years, another at every two to three, and Unilock at three to five. Brick is more absorbent than concrete, according to Unilock, so a thin coat on brick can wear out sooner than one on a dense paver.
What are common mistakes to avoid when laying pavers?
The ones that show up later are base and water problems. One Orlando restoration company's process starts with removing uneven or damaged pavers and replacing the sand base, which says a lot about where trouble begins. ProSoCo adds that water from the ground, gaps and sprinklers feeds efflorescence on brick. Sealer cannot fix either one.
How much is paver sealing in Florida?
Central Florida companies publish $1.50 to $3.00 per square foot to clean, sand and seal for 2026. No page read for this site gives a separate brick rate, so brick is priced from that range plus the published extra for stripping, $500 to $1,000 or more.
Is there a downside to sealing pavers?
On brick, the risk is trapping moisture or salt under the coat. ProSoCo says sealing does not remove salts already in the brick, so they must be cleaned off first. Unilock says brick is more absorbent and slow to dry in shade, and a matte coat keeps the natural look. A low sheen and a dry deck avoid most trouble.
Why does white powder keep showing on my brick pavers?
That is efflorescence. ProSoCo says it needs salt, water and a porous material, and it is most common on brick. Salts come from the ground and from brick, mortar, cement and sand. The same source says it eventually stops once the salts have dissipated.
Is muriatic acid a good way to clean brick pavers?
ProSoCo advises against muriatic acid on masonry and mortar, citing staining, joint etching and water-penetration damage. A contractor chooses a cleaner for the specific mark, tests it on a small spot and rinses it well.
Do brick pavers need a different sealer than concrete pavers?
Often yes. An Orlando patio company says contractors pick a sealant suited to concrete, brick or natural stone, and Unilock says brick sealer choice matters because the brick is more absorbent. Ask what product is planned for your brick, and why.
When can brand new brick pavers in Lake Nona be sealed?
One Orlando company says to wait 60 to 90 days, and Unilock says efflorescence usually takes two to three months and may take a year. Sealing before then holds the white haze in. Give the contractor the date the brick was laid.
Which other paver services can a Lake Nona homeowner book?
Get a plan made for your brick
Describe the brick, the shade and any white haze, and an answer comes within 1 business day, often sooner.
Free, no obligation
